1.5kVA 24V Pure Sine Wave SS Power Inverter is a type of power inverter that:
Key Specifications:
Power Rating:
1.5 kVA (kilovolt-amperes): Equivalent to 1500 VA.
Assuming a power factor of ~0.8, this equals about 1200 watts of usable power output.
Input Voltage:
24V DC input: Designed to work with a 24V battery bank (usually two 12V batteries in series).
Output:
Pure sine wave AC output: Produces a clean waveform, safe for sensitive electronics like laptops, TVs, and medical equipment.
Voltage and Frequency: Typically 220–240V AC at 50Hz (or 110–120V at 60Hz depending on region).
SS (Stainless Steel) or could mean Solid-State:
If SS refers to Stainless Steel, it means the inverter has a corrosion-resistant, durable casing.
If SS means Solid-State, it implies the inverter uses solid-state electronics—efficient, compact, and durable.
Use Cases:
Home backup power.
Solar power systems.
Off-grid cabins or RVs.
Battery Compatibility:
Works with deep cycle batteries (AGM, Gel, or Lithium).
Recommend a battery bank of ~100Ah to 200Ah at 24V depending on runtime needs.
Considerations Before Buying:
Check for efficiency ratings (>85% is good).
Look for protections (overload, over-temp, short circuit, low voltage).
Make sure it has enough surge capacity for devices with high startup current (e.g., refrigerators, pumps).
